manualshive.com logo in svg

GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

The GRASS VALLEY JUPITER CONTROL PANEL L32 - Datasheet and Manual are essential resources for efficiently operating your Jupiter control system. With seamless integration and intuitive features, this panel provides precise control. Download the user manual for free from manualshive.com to unlock the full potential of this exceptional product.

Share
Download
background image

JUPITER L-S and LCD Series Control Panel Instruction Manual

147

Standard Button Display

 

Destination Button

The following information is available for each Destination button.

Line # 1

Miscellaneous information will be shown on Line #1. This information can 
be Page or Status information.

Page Numbers

The following information will only be displayed on Button #1 and will 
time out after approximately 5 seconds.

Page numbers are displayed in the following format “p: xxx/yyy.”

 

xxx = Current page number.

 

yyy = Total number of pages. 

 

Locked Status

The following information will be displayed when the Destination is 
locked. The display color will turn red and the Letter “L,” followed by the 
name of the panel that performed the lock, will be displayed.

Protected Status

The following information will be displayed when the Destination is pro-
tected. The display color will turn magenta and the Letter “P,” followed by 
the name of the panel that did the protecting, will be displayed.

Tie Line Status

The status of a Tie Line will be displayed by the letter “T” on line #1 of the 
Destination that is using a tie line.

The Source in the Multiple-Destination Mode

The preset Source will be displayed on the top row, before the Take button 
is selected in the Multiple-Destination mode.

Line #2

The Source name that is currently being routed to the Destination will be 
shown on line #2. The line will be blank if no Source is being routed.

Line #3

The assigned Destination name is shown on line #3.

Summary of Contents for JUPITER CONTROL PANEL L32 -

























































































































































































































Reviews:

No comments

Related manuals for JUPITER CONTROL PANEL L32 -

Eaton ELC-COENETM Instruction Sheet preview
ELC-COENETM
Brand: Eaton Pages: 6
Eaton InsulGard Installation And Start Up Manualline preview
InsulGard
Brand: Eaton Pages: 35
Eaton xStorage Home User Interface Manual preview
xStorage Home
Brand: Eaton Pages: 18
Eaton DF6000 Application Manual preview
DF6000
Brand: Eaton Pages: 73
Eaton DALI Installation Manual preview
DALI
Brand: Eaton Pages: 4
Eaton Cutler-Hammer IQ DP-4000 Installation, Operation And Maintenance Instructions preview
Cutler-Hammer IQ DP-4000
Brand: Eaton Pages: 87
Eaton Char-Lynn Manual preview
Char-Lynn
Brand: Eaton Pages: 14
Eaton BiWire Flexi Installation Manual preview
BiWire Flexi
Brand: Eaton Pages: 36
Farfisa TD6100 Manual preview
TD6100
Brand: Farfisa Pages: 20
Racal Instruments 1266 Manual preview
1266
Brand: Racal Instruments Pages: 64
Taie FY100 Communications Manual preview
FY100
Brand: Taie Pages: 28
ICP DAS USA MDC-700 Series Quick Start preview
MDC-700 Series
Brand: ICP DAS USA Pages: 4
ICP DAS USA I-7080 Quick Start Manual preview
I-7080
Brand: ICP DAS USA Pages: 6
ICP DAS USA EIP-2000 Series Faq preview
EIP-2000 Series
Brand: ICP DAS USA Pages: 19
Omega PHCN-37 User Manual preview
PHCN-37
Brand: Omega Pages: 56
Omega DP25-TC Quick Start Manuals preview
DP25-TC
Brand: Omega Pages: 2
DMX4ALL ArtNet-DMX Mux16 User Manual preview
ArtNet-DMX Mux16
Brand: DMX4ALL Pages: 21
H.E. Anderson Ratio Feeder J+ Advanced Series Manual preview
Ratio Feeder J+ Advanced Series
Brand: H.E. Anderson Pages: 11

Brands by name

Popular brands

Load more brands