manualshive.com logo in svg

GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

The GRASS VALLEY JUPITER CONTROL PANEL L32 - Datasheet and Manual are essential resources for efficiently operating your Jupiter control system. With seamless integration and intuitive features, this panel provides precise control. Download the user manual for free from manualshive.com to unlock the full potential of this exceptional product.

Share
Download
background image

JUPITER L-S and LCD Series Control Panel Instruction Manual

151

Menu Modes

 

buttons are for information only. The Information is broken up into three 
different “pages.” Use the Scroll wheel to cycle through the available infor-
mation pages. 

Figure 82.  LCD16 Control Panel

The features of each page are explained below:

Page #1

Panel ID button

: This button is in the #1 location. The 

Panel ID button 

shows the

 

panel name that has been assigned in the Jupiter configuration, and the ID 
that is assigned by the user to retrieve the correct Control panel configura-
tion settings from the host. The ID can be assigned via the Web page or 
directly from the panel.

Physical ID button

: This button is in the #2 location. The 

Physical ID button 

shows 

the physical ID and name (For example, HW: 265, LCD16) that is assigned 
by the front panel hardware.

Net-1 button

: This button is in the #3 location. The 

Net-1 button

 displays the 

current IP address that is assigned to the Control panel’s first LAN port that 
is on the back of the panel. This assignment is made using the NetConfig 
application or through the Web page.

Net-2 button

: This button is in the #4 location. The 

Net-2 button

 displays the 

current IP address that is assigned to the Control panel’s second LAN port 
that is on the back of the panel. This assignment is made through the Web 
page. (The second LAN port is for future use only.)

Pri. Host IP button

: This button is in the #5 location. The 

Pri. Host IP button

 dis-

plays the current Primary Host IP. This assignment is made through the 
Web page.

Sec. Host IP button

: This button is in the #6 location. The 

Sec. Host IP button

 dis-

plays the current Secondary Host IP. This assignment is made through the 
Web page.

Information button

: This button is in the #16 location. This button is for infor-

mation only.

Button #1-8

Button # 16

Summary of Contents for JUPITER CONTROL PANEL L32 -

























































































































































































































Reviews:

No comments

Related manuals for JUPITER CONTROL PANEL L32 -

ABB ACS355 series Quick Start Up Manual preview
ACS355 series
Brand: ABB Pages: 139
ABB ACH400 Series Retrofit Manual preview
ACH400 Series
Brand: ABB Pages: 28
ABB TZIDC-110 Operating Instructions Manual preview
TZIDC-110
Brand: ABB Pages: 59
Watts 1717 Installation Instruction preview
1717
Brand: Watts Pages: 2
Hanbay RC Series Manual preview
RC Series
Brand: Hanbay Pages: 18
DAB ACTIVE DRIVER M/M 1.1 Programming Manual preview
ACTIVE DRIVER M/M 1.1
Brand: DAB Pages: 10
d&b audiotechnik 10D Quick Start Manual preview
10D
Brand: d&b audiotechnik Pages: 3
DAB PUMPS ACTIVE DRIVER M/M 1.1 Manual preview
ACTIVE DRIVER M/M 1.1
Brand: DAB PUMPS Pages: 38
GAC ESD-5550 Series Technical Information preview
ESD-5550 Series
Brand: GAC Pages: 12
Gardena EasyPlus Operator'S Manual preview
EasyPlus
Brand: Gardena Pages: 14
Gardena 1273 Operating Instructions preview
1273
Brand: Gardena Pages: 4
janitza 800-CT8-A User Manual And Technical Data preview
800-CT8-A
Brand: janitza Pages: 58
Lawler 804 Installation & Maintenance Manual preview
804
Brand: Lawler Pages: 5
Zamel Extra Free RZB-02 Quick Manual preview
Extra Free RZB-02
Brand: Zamel Pages: 2
Yamaha DCP4S-US Owner'S Manual preview
DCP4S-US
Brand: Yamaha Pages: 2
Jetter 60873050 Manual preview
60873050
Brand: Jetter Pages: 24
Taconova NOVASTAT EL DIGITAL Manual preview
NOVASTAT EL DIGITAL
Brand: Taconova Pages: 7
GEA SIMATIC C7-623 Instruction Manual preview
SIMATIC C7-623
Brand: GEA Pages: 13

Brands by name

Popular brands

Load more brands