GRASS VALLEY GV MATRIX, User Manual

Page: 55 / 115

39
GV Matrix
User Manual
SNMP functionality using the local control panel
Level 1 Level 2 Level 3
SNMP OPTIONS SNMP AGENT [ENABLE, DISABLE]
SNMP TRAPS LIST IP ADDRESS [[0...255].[0...255].[0...255].[0...255]]
ADD IP ADDRESS [[0...255].[0...255].[0...255].[0...255]]
REMOVE ADDRESS [[0...255].[0...255].[0...255].[0...255]]
Data Restoration
Many of the Densité-series cards that can be installed in the GV Matrix frame are complex
and have a lot of data stored on-board related to their configuration and parameter values.
The CPU-ETH3 controller provides a backup of this data, which can be restored to the card
when needed. This is valuable if the card is inadvertently reconfigured, or is replaced after
failure with a new card of the same type. The saving of the current data into the controller’s
memory, and restoring the data onto the Densité-series card, can be done manually or
automatically.
Manage data restoration using...
iControl
Controller’s
web page
Local control
panel
  
Data Restoration configuration using iControl
To manually save and apply restore point data
1 Click Restore Point and view the Cards tab.