GRASS VALLEY GV MATRIX User Manual Download Page 101 | Manualshive

Page: 101 / 115

background image

85

GV Matrix

User Manual

Status/Name

This column contains an expandable tree listing all the alarms reported by this device.

Each alarm name includes an icon that shows its current status

The Card LED, Overall alarm and GSM contribution columns contain pulldown lists that
allow the level of contribution of each individual alarm to the alarm named in the column
heading to be set. Click on the alarm status in either of these columns to show the status
options that are available, then click on one to select it. If no options appear, the alarm is
not user-configurable

Card LED

This column allows configuration of the contribution of selected individual alarms to the
status displayed on the GV Matrix local control panel. Many cards also have a Status LED
located on the front card edge. The Card LED status is shown at the bottom of the alarm
tree in the Status/Name column.

This column is not shown in all cases.

Overall Alarm

This column allows configuration of the contribution of each individual alarm to the Overall
Alarm associated with this card. The Overall Alarm is shown in the upper left corner of the
iControl panel, and also appears at the bottom of the Status/Name column.

GSM Contribution

This column allows configuration of the contribution of each individual alarm to the GSM
Alarm Status associated with this card. GSM is a dynamic register of all iControl system
alarms, and is also an alarm provider for external applications. The possible values for this
contribution are related to the Overall alarm contribution:

• If the Overall alarm contribution is selected as Disabled, the GSM alarm contribution

can be set to any available value

• If the Overall alarm contribution is selected as any level other than disabled, the GSM

contribution is forced to follow the Overall Alarm.

«
...
99
100
101
102
103
...
»

Summary of Contents for GV MATRIX




















































































































Reviews:

No comments

Related manuals for GV MATRIX

Baseline 2226 Plus

Brand: 3Com Pages: 4

SmartSwitch 9A100

Brand: Cabletron Systems Pages: 52

SmartSwitch 9W006

Brand: Cabletron Systems Pages: 34

SmartSTACK ELS100-S24TX2M

Brand: Cabletron Systems Pages: 102

Brand: Cabletron Systems Pages: 24

SmartSwitch 9000

Brand: Cabletron Systems Pages: 14

Brand: Cabletron Systems Pages: 38

Brand: hager Pages: 2

Brand: Crestron Pages: 2

Brand: Festo Pages: 2

EXHL-TRN-LE1 Series

Brand: Larson Electronics Pages: 2

SISTG1040-242-LRT

Brand: Transition Networks Pages: 31

NEXT-POE4210L2S-TP

Brand: Synology Pages: 15

Brand: Quartz Pages: 43

Brand: Scame electrical solutions Pages: 68

Brand: I-Tech Pages: 19

Brand: Linkskey Pages: 2

Brand: Edimax Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands