GRASS VALLEY GV MATRIX, User Manual

Page: 29 / 115

13
GV Matrix
User Manual
DNAME is the Densité name you created in step 5 on page 12.
• The GV Matrix frame reference module, incorporated into the controller, but with
its own control panel.
Label Frame Reference
Short label Frame Re
Type Frame Reference
Comments HD/SD Frame Reference Module
Frame DNAME
• IFM-2T - the GV Matrix fabric module.
Label IFM-2T
Short label IFM-2T
Type IFM-2T
Comments Internal Router card
Frame DNAME
• The GV Matrix Manager associated with your GV Matrix is found in the GV Matrix
Manager folder.
The modular cards installed in the GV Matrix are also now available in the iControl
Navigator window.
Together, these devices make up the iControl presence of your GV Matrix.
GV Matrix Initial Configuration
You will configure three elements of your GV Matrix in this initial setup:
• Configure the Controller , on page 13.
• Configure the Frame Reference , on page 15.
• Configure the Fabric Module I/O , on page 15.
Configure the Controller
Use the CPU-ETH3 Web client application to perform the configuration steps that follow.
To configure the GV Matrix controller
1 Open a Web browser window and enter your GV Matrix's IP address in the address bar.
The home page of the CPU-ETH3 Web client appears.
Comments Densite Frame Service
Frame DNAME