GRASS VALLEY GV MATRIX, User Manual

Page: 42 / 115

26
Configuring Your GV Matrix
Status Monitoring
• Add: Force the iControl service for this CPU-ETH3 to register itself on a user-
specified Jini lookup service, using the following syntax in the data box:
jini://<ip_address>
where <ip_address> is the ip address of the server running the lookup service.
• Remove: select one of the services listed in the window by clicking on it, and then
click Remove to open a query box allowing you to delete it from the window.
Status Monitoring
The CPU-ETH3 controller continuously monitors the operating condition and status of the
GV Matrix frame’s power supplies and ventilating fans. It also monitors the status and usage
of its ethernet ports, and the status of its on-board memory, as well as the data throughput
of all modular cards installed in the frame.
Monitor status using...
iControl
Controller’s
web page
Local control
panel
  
Status Monitoring using iControl
The iControl interface always displays two icons in the upper left of the window. These
report the status of the two power supplies.
Icon Messages
Power supply 1 voltage: OK
Power supply 2 voltage: OK
Power supply 1 voltage: Absent
Power supply 2 voltage: Absent
Power supply 1 voltage: Error
Power supply 2 voltage: Error