GRASS VALLEY GV MATRIX, User Manual

Page: 54 / 115

38
Configuring Your GV Matrix
SNMP functionality using iControl
SNMP functionality using iControl
The iControl panel is only available when SNMP is enabled, either from the web page or
from the local control panel.
To specify trap managers once SNMP is enabled
1 Click the Network button in the left-side navigation pane, and select the SNMP tab.
2 Enter the IP addresses of up to three trap managers.
The trap targets are active as soon as the addresses are entered.
SNMP functionality using the web page
To enable and configure SNMP traps
1 Select Setup-SNMP from the left-side navigation pane.
2 Select the Enabled radio button.
3 Enter the IP addresses of up to three trap managers.
4 Click Apply to save your changes.