36
Configuring Your GV Matrix
Network Configuration using the Menu
2 Enter a
Hostname
in the databox.
3 If you have activated the
Ethernet Link Redundancy Option
, you can Enable or Disable
it here.
on page 36 for detailed information about this option.
4 Enter the
IP address
,
Network Mask
and
Gateway
for the two ethernet ports.
5 Select
AUTONEGOTIATION
in the MII Status pulldown for each port.
6 Click
Apply
to save your changes.
If you have changed the IP address, your browser will no longer have access to the web
page, so you will need to reconnect using the new IP address.
Network Configuration using the Menu
To change the IP address
1 Scroll down to ETH1 OPTIONS
2 Change the IP ADDRESS, NETWORK MASK and GATEWAY addresses as required.
3 See
Setting the GV Matrix’s IP Address
on page 10 for more detailed instructions.
Level 1
Level 2
Level 3
ETH1 OPTIONS
IP ADDRESS
[[0...255].[0...255].[0...255].[0...255]]
NETWORK MASK
[[0...255].[0...255].[0...255].[0...255]]
GATEWAY
[[0...255].[0...255].[0...255].[0...255]]
MAC ADDRESS
[[0...FFF].[0...FFF].[0...FFF]]
MII STATUS
[AUTONEGOTIATION, 100baseTx-FD, 10baseT-FD, 10baseT-HD]
ETH2 OPTIONS
(SAME AS FOR ETH1)
Link Redundancy
DENSITE 3+ CPU-ETH3-OPT-LINK is a software option that enables the Ethernet link
redundancy function on the GV Matrix’s CPU-ETH3.
• Ethernet Link Redundancy is achieved by using channel bonding.
• Channel bonding is an arrangement in which the CPU-ETH3’s two network interfaces
are combined for redundancy.
The GV Matrix’s CPU-ETH3 works in the Active-Backup bonding mode. Active-Backup
bonding provides fault tolerance.
• Only one slave in the bond is active.
• The slave
eth1
is the primary device. The primary device will always be the active slave
while it’s available. Only when the primary is off-line will the alternate device
eth2
be
used.
• The
Link Redundancy Option
can only be activated via the web page.
Summary of Contents for GV MATRIX
Page 12: ...xii Notices ...
Page 16: ...xvi Notices ...
Page 34: ...18 Getting Started Ethernet Link Redundancy Channel Bonding ...
Page 104: ...88 Configuring Your GV Matrix Asynchronous Video ...
