GRASS VALLEY GV MATRIX, User Manual

Page: 86 / 115

70
Configuring Your GV Matrix
Input Configuration - SDI
2 Type a name for this input in the Name data box
Detected Format Status icon
ASI Green
All other formats Red
Input Configuration - SDI
The Input Config panel provides resources to configure the processing of the nine rear-
panel inputs before they are sent to the IFM-2T fabric module.
If an input has been configured for SDI input using the GV Node Manager , the tab for that
input in the Input Config panel will be labeled SDI IN n (n = 1 through 9).
To assign a name to an input
1 Click Input Config and select one of the SDI IN tabs.
2 Type a name for this input in the Name data box.
To select the format that the XIO-4901 input will lock to
1 Click the Format Mode pulldown
2 Click to select the desired format mode:
Selection Details
Follow source format The XIO input format follows the currently-detected input.
Lock to initial format
detected The input format locks to the initial format detected, and
remains unchanged even if the source format changes.
Manual Forces the input processing to use a specific format.
Use the
Format pulldown to select one of these supported
formats: 525i, 625i, 1080p59.94A, 1080p50A, 1080i59.94,
1080i50, 720p50.