GRASS VALLEY GV MATRIX User Manual Download Page 35 | Manualshive

Page: 35 / 115

background image

19

Configuring Your GV Matrix

This chapter describes how to configure your GV Matrix using the available user interfaces.

Summary

User Interfaces   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19
Configure the CPU-ETH3 Controller  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  24
Configure the Frame Reference  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  52
Configure the IFM-2T Fabric Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59
Configure the XIO-4901 SDI I/O Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  66
GV Node Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  83
Alarm Configuration   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  84
Asynchronous Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  87

User Interfaces

The CPU-ETH3 controller is the control point for the GV Matrix frame and the modular cards
installed in the frame. There are no separate operating controls on the frame or cards.

There are three ways to configure the GV Matrix:

User interface

About...

Local control panel

Step through a menu displayed on the touch screen on the front of
the frame. No IP connection required, but not all features available.
Both the controller itself, and modular cards installed in the frame, can
be configured.

Controller’s web page

A web client served by the controller. IP connection required.
Complete functionality of the controller is provided, and help is
displayed on the browser page. Does not configure or control other
elements of the GV Matrix, i.e. fabric module or modular cards.

Grass Valley’s graphic user interface. IP connection required. All
elements of the GV Matrix can be configured and controlled with
iControl.

Local control panel

The local control panel is mounted on the front of the CPU-ETH3 controller card, and when
installed is located in the upper-right corner of the frame.

The touch screen interface is accessed through an aperture in the frame door.

«
...
33
34
35
36
37
...
»

Summary of Contents for GV MATRIX




















































































































Reviews:

No comments

Related manuals for GV MATRIX

Brand: OEZ Pages: 5

Brand: Danfoss Pages: 6

Matrix DFE-Gold 4G4202-60

Brand: Enterasys Pages: 78

Brand: ZENEC Pages: 16

Anaconda Switcher VK68A

Brand: X10 Pages: 2

Brand: Dexon Pages: 31

Brand: Cardin Elettronica Pages: 2

Brand: SignaMax Pages: 2

Brand: TRENDnet Pages: 16

Brand: Fairchild Pages: 19

TurboIron 24X series

Brand: Brocade Communications Systems Pages: 82

Brand: Extron electronics Pages: 137

Brand: Unipoe Pages: 41

Brand: N-Tron Pages: 157

Brand: ALFAtron Pages: 44

Brand: Black Box Pages: 20

SW-HBT-C6POE-16X16E

Brand: Avenview Pages: 19

JetNet 5728G series

Brand: Korenix Pages: 134

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands