74
Configuring Your GV Matrix
Output Configuration - SDI
ASI streams are passed through without processing, so this tab only allows you to assign a
name to the output, and reports the status of the detected format at the output.
To assign a name to an output
1 Click
Output Config
and select an
ASI OUT
tab.
2 Type a name for this output in the
Name
data box.
Detected Format
Status icon
ASI
Green
All other formats
Red
Output Configuration - SDI
The
Output Config
panel provides resources to configure the processing of the nine signals
received from the IFM-2T fabric module before they are sent to the rear-panel outputs.
If an output has been configured for SDI output using the GV Node Manager, the tab for
that output in the Output Config panel will be labeled SDI OUT n (n = 1 through 9).
To assign a name to an output
1 Click
Output Config
and select one of the
SDI OUT
tabs.
2 Type a name for this output in the
Name
data box.
To select how the output format of the XIO-4901is determined
1 Click the
Format Mode
pulldown
Summary of Contents for GV MATRIX
Page 12: ...xii Notices ...
Page 16: ...xvi Notices ...
Page 34: ...18 Getting Started Ethernet Link Redundancy Channel Bonding ...
Page 104: ...88 Configuring Your GV Matrix Asynchronous Video ...
