GRASS VALLEY GV MATRIX, User Manual

Page: 78 / 115

Icon # Significance
1 Card control status for this IFM-2T
• Green (REM): Remote control via this iControl service panel.
• Yellow (LOC): Local control of this card from the GV Matrix’s local control panel.
2 Reference status:
• Green: Reference is OK.
• Red: Reference error.
•
3 Card health:
• Green: Card OK.
• Red:
Card failure.
62
Configuring Your GV Matrix
Alarms
When an error is flagged, an error status message will be shown beneath the dashboard
icons. Multiple error messages will cycle in the display.
• You can always check the current status of an icon by mousing over; the status will be
shown in the message area.
Alarms
The fabric module generates alarms that are sent to the GV Matrix controller card when
error conditions are detected. These alarms are used to set the control panel status display,
and the status icon in the top left of the iControl window.
The alarms are reported to the iControl network, and can be reported locally on the frame’s
GPI port.
GPI reporting can only be accessed from the menu, as described at the end of this section
(page 32).
To configure the alarms
1 Click Alarm Config .
The Alarm Configuration panel opens in a new window, and can be resized if needed. It
allows the alarm reporting of the module to be configured. The panel is organized in
columns.
2 For each line in the Status/Name column:
a Click on the icon in the Overall Alarm column