Graef SKS 700, Operating Instructions Manual

Page: 47 / 296

47
DE
EN
FR
NL
IT
ES
DK
NO
SE
PL
HU
UKR
Problem Cause Solution
The stop illumination
lights red Safety instruction - the
stop stands open for a
long time Check to see that the
stop is completely
closed after using the
machine. The stop illu-
mination goes out.
The stop illumination
pulsates red and the il-
lumination of the blade
and the scaler go out Safety instruction - the
stop has already stood
open for a long time Check to see that the
stop is completely
closed after using the
machine. The stop illu-
mination goes out.
The unit slips on the
work top while cutting The installation surface
or the rubber feet of
the unit are soiled Make sure that the
installation surface
and the rubber feet of
the machine are clean
and free from grease.
Select a suitable
installation surface, if
necessary
Blade blocks while
cutting The unit is overloaded Interrupt the cutting
process and cautious-
ly remove the slicing
material. Make sure
to use only suitable
goods to be cut and
adjust the cut width ac-
cordingly, if necessary.
The connection line
cannot be pushed into
the cable compartment The connection line is
blocked in the cable
compartment Pull the connection line
a bit out of the cable
compartment and
push it in again. While
doing so, check to see
that a short length as
possible of the con-
nection line is grasped.