![background image](http://html.mh-extra.com/html/graco/precisionmix-ii/precisionmix-ii_instructions-and-parts-list_2251701164.webp)
Recipe Setup
9–22
Flow Meter Calibration Procedure
Selection 5: Mixed Material Calibration
–
continued
7.
To avoid splashing, slowly open the component A
ratio check valve by turning the knob out. After one
shot of component A has dispensed, slowly open
the component B ratio check valve. After one shot
of component B has dispensed, slowly open the
component C ratio check valve.
The PrecisionMix II 3K will run and dispense the
number of doses selected of component A, B, and
C into the separate beakers.
8.
Close the ratio check valves after the sample is
dispensed.
To abort calibration, you can select STOP.
9.
The screen will display the volume of fluid the
PrecisionMix II 3K determined was dispensed in
the
Calibration Volume
fields for A, B, and C
Flow Meters, based on the previously entered
calibration factor.
10. If the actual volumes dispensed into the containers
are different, type in the amount actually dis-
pensed in the
new Calibration Volume
fields for
Component A, B, and C and press the ENTER key
.
NOTE:
New values can be typed in or the toggle keys
can be used to increase
or decrease
values.
11. When you are done calibrating meters,
a.
Flush the ratio check valves.
b.
Open the manifold shut-off valves.
c.
Return to the Run Monitor screens to begin
production.
Summary of Contents for PrecisionMix ii
