Graco PrecisionMix ii, Instructions And Parts List

Page: 113 / 260

System Configuration 8–5
System Configuration
Screens Information
C1: Language
SYSTEM CONFIGURATION Station: 0
LANGUAGE SELECTION
Select the desired language:
1. English
2. Francais
3. Deutsch
4. Espanol
5. Japanese
6. Other
> 1
Type the number for the desired language,
then . Next screen .
Select the language you want the screens to display.
Your choices are English, French, German, Spanish,
Japanese, or other.
In order to use selection #6, “
Other"
, the user
interface must be programmed with the language
utility.
IMPORTANT! When switching from one
language to another you must cycle power.
Power down the PrecisionMix II and restart.
The new language will be displayed.
C2: Station Number
SYSTEM CONFIGURATION Station: 0
STATION NUMBER
Enter Station number (1-32):
> 1
Note: The system must be powered down
and powered back up again for the
new station number to take effect.
Type the station number for the controller,
then . Next screen .
The Station Number screen is used to set an identifica-
tion (ID) number for the PrecisionMix controller. The ID
number will print out on the run and setup reports. The
station number is needed when multiple PrecisionMix
controls are connected to a network. Station #1 is the
default.
IMPORTANT! When using station numbers
for network addresses, the control must be
powered down and back up again for a new
number to be activated.