Installation
3–32
Power-up Checklist
Power-up Steps
PrecisionMix II 3K System
Make sure the Operator Station switch is in STANDBY before turning on the system.
1.
Ensure that the jumper position on the 24 VDC power supply is in the correct position for the main
supply voltage.
2.
Ensure that the fuses are the correct value for the main supply voltage.
3.
Turn on the main power switch.
4.
Check that the DC ON LED on the power supply is lit.
5.
Check that LEDs 1, 2, 3, and 4 on the controller interface module are lit. See Fig. 3.23.
6.
Check that the CAN and RUN LEDs on the controller are lit, the ERR (error) LED is not lit, and the
RS232 LED is blinking. See Fig. 3.23.
7.
Check that the OK LEDs on all the I/O modules are lit.
8.
Check that the User Interface has powered up and is displaying the initial Run Monitor screen. See
page 6–3.
9.
Check that all the lights on the Operator Station, including the alarm light, illuminate for about 1
second during power-up. If the Operator Station includes integrated color change, make sure that the
color change display does not remain at
E2"
. See page 4–4.
Optional Flow Control
10. Check that the LEDs 1 and 2 on the analog interface module are lit. See Fig. 3.23.
11. Check the I/P transducer as instructed on page 3–34.
12. If flow rate setpoint is controlled from analog input, test the external 4–20 mA input signal as
instructed on page 3–35.
Summary of Contents for PrecisionMix ii
