
WX-500 Lightning Strikes
1
st
Ed Nov 2018
IDU-450 EFIS Software Version 8.0H (Rotorcraft)
S-5
FORMAT..
CENTER
ARC
ROUTE
STRK MODE
CELL MODE
1
STRK TEST
Switch to centered display format
(shown if arced is current display format)
Switch to arced display format
(shown if centered is current display format)
Display active flight plan route
Switch to strike mode
(shown if cell is current mode)
Switch to cell mode
(shown if strike is current mode)
Activate WX-500 pilot initiated test function
MENU
DCLTR..
DONE
1
Accept Changes
Figure S-7: MFD Strikes Format (FORMAT) Menu
S 4. MFD Page First-Level Option Descriptions
CLR STRKS (L2)
or
WX LGND (L2)
: On ND or Strikes page with WX-500
enabled,
CLR STRKS
activates the strike clear option.
S 5.
MFD Fault Display (FAULTS) Menu
If the WX-500 option is enabled, loss of communications with the WX-500.
S 6. Menu Synchronization
Table S-3: Menu Synchronization
Menu Parameter
Notes
The following menu parameters are only synchronized onside. These
parameters are usually sensor selections or PFD options used to keep
the appearance of any pilot's PFD consistent in the case of PFD
reversion. The onside characteristic means that individual pilots can still
adjust their PFD settings to their preference.
MFD Strike (WX-500) Page Settings
The following menu parameters are independent between displays.
These are used to support non-PFD display options to give the pilot
maximum MFD operating flexibility.
MFD Strike (WX-500) Page Settings
S