
Section 7 IFR Procedures
1
st
Ed Nov 2018
IDU-450 EFIS Software Version 8.0H (Rotorcraft)
7-35
7.15. Selection of an Instrument Procedure
When an instrument procedure is selected and active, the receiver notifies
the pilot of the most accurate level of service supported by the combination
of the GPS/SBAS signal, receiver, and selected approach using naming
conventions on the minima lines of the selected approach procedure. Once
the level of service has been given, the EFIS operates in this mode for the
duration of the procedure, unless the level of service is unavailable. The
EFIS cannot change back to a more accurate level of service until the next
time an approach is activated.
The following are samples of step-by-step procedures:
1) Standard Instrument Departure (DP)
2) Standard Terminal Arrival Route (STAR)
3) ILS Instrument Approach
4) ILS Instrument Approach with Manual Termination Leg
5) LOC Back Course Instrument Approach
6) RNAV (GPS) Instrument Approach to LPV Minima
7) NRST ILS Instrument Approach
8) VOR/DME Instrument Approach
9) ILS or LOC RWY 1 Instrument Approach with Missed Approach Flown
to Alternate Fix
7.15.1. Missed Approach and Departure Path Definition
Figure 7-16: Missed Approach and Departure Path
Missed
Approach
Path