Section 5 Menu Functions and Procedures
5-24
IDU-450 EFIS Software Version 8.0H (Rotorcraft)
Rev A Apr 2019
5.8.2. Active Flight Plan (ACTV) Menu Options
L2
L3
L4
R4
R2
R3
DELETE
D
INSERT..
PTK..
INFO..
Delete
selected waypoint
or procedure
Enter parallel track
offset distance
Insert phantom
waypoint at current
location to
“re-center” skyway
and make
highlighted
waypoint active
Information Menu
for the highlighted
waypoint
1
ACTV OFF
Delete active
flight plan and
place autopilot
roll-steering into
wing-leveler mode
Scroll – Scroll through active flight
plan waypoint selection list
Push – Select highlighted waypoint
1
Enter Identifier
Single
Match?
L3
INFO..
Match List
...
...
...
1
No
Waypoint or
Airway?
Yes
Insert waypoint into
active flight plan
Airway
Airway
Waypoint List
...
...
...
1
Waypoint
Insert selected
airway waypoints
into active flight plan
ACTV
L1
SAVE
Save active flight plan
L2
L3
L4
R4
R2
R3
NRST USR..
AIRWAY..
NRST FIX..
NRST NDB..
NRST VOR..
Searches for and
presents list of
Nearest User
Waypoints
Searches for and
presents list of
Nearest NDBs
Searches for and
presents list of
Airways going through
waypoint prior to
insertion point
Searches for and
presents list of
Nearest VORs
NRST APT..
Searches for and
presents list of
Nearest Airports
Searches for and
presents list of
Nearest Enroute
Waypoints
Figure 5-9: Active Flight Plan Menu Options
1)
SAVE (L1)
: Saves active flight plan. Stored flight plans are saved
without procedures or phantom waypoint (this is a safety item as
procedures potentially change every 28 days). Stored flight plans are
named by their first and last waypoints. If the new stored flight plan has
the same start and end points as a previously saved flight plan but has
different routing, a number (0-9) is appended to the name to uniquely
identify up to 10 routings with the same start and end points.
2)
ACTV OFF (L2)
: Deletes active flight plan. The pilot is prompted to
confirm deletion prior to completion of the operation.