Traffic
1
st
Ed Nov 2018
IDU-450 EFIS Software Version 8.0H (Rotorcraft)
T-7
The active flight plan path’s active leg/manual course and active waypoint
are magenta and turn amber (yellow) in the event of a GPS LON caution.
The traffic page displays airport runways in correct relationship and scale
to the ownship symbol.
When traffic source is ADS-B, traffic vectors and aircraft identification data
are shown. The traffic vector is a line connecting the traffic’s current
position with the traffic’s predicted position based on its current track and
groundspeed. The prediction time, in minutes, is pilot-selectable. Aircraft
identification (e.g. aircraft registration number or scheduled airline flight
number) is text located near the traffic symbol in the same color as the
traffic symbol.
T 5. MFD Traffic Format (FORMAT) Menu
FORMAT..
ALT FILTER
TCAD TEST
(b)
1
(a) Shown if optional TIS-B installed.
(b) Shown if optional Ryan/Avidyne
TCAD installed.
TREND VECTOR
(a)
Activate TCAD pilot
initiated test function
ABOVE
BELOW
AUTO
1
NORMAL
ALL
MENU
DCLTR..
ROUTE
Display active flight plan route
DONE
1
IDENT
(a)
Display traffic identifier/squawk information
Accept changes
1
R4
OFF
Turn traffic trend vector off
## MIN
Scroll – Change trend vector
length in 1 min
increments not to
exceed 15 min
Push – Set selected trend
vector length
Scroll – Scroll through traffic
altitude filter options
Push – Set selected traffic
altitude filter
Figure T-9: MFD Traffic Format (FORMAT) Menu
Upon selecting the MFD format menu, a list appears with the following
options:
1)
ALT FILTER
: Sets traffic altitude filter to
AUTO
,
ABOVE
,
BELOW
,
NORMAL
, or
ALL
.
2)
TCAD TEST
: Activates test function when Ryan/Avidyne TCAD.
3)
TREND VECTOR
: When TCAS flag is TIS-B, sets traffic trend vector
length in minutes.
OFF
(R4)
turns off traffic trend vector.
4)
DCLTR..
: Activates option list.
a)
ROUTE
: Toggles display of active flight plan route.