GEFRAN-SIEI ARTDrive Vector V2 400Vac Series, Instruction Manual

Page: 77 / 387

ARTDrive V2 series - Instruction Manual Chapter 5 Quick Start Up Guide • 77
Chapter 5 - Quick Start Up Guide
5.1 Functional Connection Diagram
AC
Power
Supply
Cabinet Mounting panel AC Drive
AC
Mains
choke
(Up to
20 Hp
sizes)
Ground
Bus
Motor
cable
terminals
AC Motor
Encoder cable
EMI filter
U1 V1 W1 U2 V2 W2 PE2 PE1
AC Mains
Contactor
AC fuses
N
OTE
!
PE1 is the drive safety ground. If PE2 is used to connect the motor ground, EMI
filter ground must be connected to PE1.
5.2 Overview
This guide assumes a standard start up using the keypad for a drive and motor
that is to be run in any of the available regulation modes. It is also assumed that
a standard scheme is to be used for control. In other words, that the drive will
be run from pushbuttons (or contacts) and the speed will be set from either the
keypad or a pot input (or 0 to 10 vdc source). While the drive has more modes