GEFRAN-SIEI ARTDrive Vector V2 400Vac Series, Instruction Manual

Page: 76 / 387

76 • Chapter 4 Wiring Procedure ARTDrive V2 series - Instruction Manual
4.11 Discharge Time of the DC-Link
Table 4.11.1: DC Link Discharge Times
Type I
2N
Time (seconds) Type I
2N
Time (seconds)
1007 2.1 2002 3.8
1015 3.5 2003 4.5
1022 4.9 2005 7.0 200
1030 6.5 3007 10.8
2040 8.3 3010 13.8
2055 11 3015 18.7
2075 15.4 3020 24.2
3110 21.6 4025 30 230
3150 28.7
4030
36 230
4220 40 60 4040 46 230
4300 54 60 4050 58 300
4370 68 90 5060 69 300
5450 81 5075 86 300
5550 99 6100 109 300
6750 124 7125 137 300
7900 160 7150 158 300
71100 183 8200 218 300
71320
217
81600 282
avy0708
100
250
A
V
y…-4
(230V…480V)
A
V
y…-5
(575V)
120
90
150
205
220
This is the minimum time that must be elapsed since an AVy Drive is disconnected
from the AC Input before an operator may service parts inside the Drive to avoid
electric shock hazard.
C
ONDITION
:
These values consider a turn off for a Drive supplied at 10% (for AVy...-
4, 230...480Vac) or 10% (for AVy...-5, 575Vac), without any option,
(the charge for the switching supply is the regulation card, the keypad and the
24Vdc fans “if mounted”).
The Drive is disabled. This represents the worst case condition.