GE Voluson i BT06, Service Manual

Page: 49 / 516

GE V
OLUSON
i / V
OLUSON
e
D
IRECTION
KTI106052, R
EVISION
10 S
ERVICE
M
ANUAL
Chapter 1 - Introduction 1-5
1-2-3 Product Labels and Icons
The following table describes the purpose and location of safety labels and other important information
provided on the equipment.
Description of symbols and labels used in combination with this Voluson ultrasound system.
BT Version:
BT-Version:
Product labels and its location depend on BT-version and/or date of manufacture. For description of all
symbols and labels used on the system, refer to Chapter 2 in the Basic User Manual of your system.
Table 1-5 Product Icons
LABEL/SYMBOL PURPOSE/MEANING LOCATION
Identification and Rating Plate
Manufacturer's name and address
Model and serial numbers
Electrical ratings
on the base of the unit (Main label)
on each probe
Manufacturer’s name and address
Identification and Rating Plate(rear
side of the unit / on plug of each probe)
Date of manufacture
Identification and Rating Plate(rear
side of the unit / on plug of each probe)
Serial number
Identification and Rating Plate(rear
side of the unit / on plug of each probe)
Catalog or model number
Identification and Rating Plate(rear
side of the unit / on plug of each probe)
Device Listing/Certification Labels
Laboratory logo or labels denoting conformance with industry
safety standards such as UL or IEC.
on the base of the unit (Main label)
CE Conformity mark according to Medical Device Directive
93/42/EEC.
0123
: Identification number of notified body TÜV Süd Product
Service.
on the base of the unit (Main label)
on each probe
“Tested and production monitored by TÜV Product Service
NRTL with respect to ELECTRICAL SHOCK, FIRE and
MECHANICAL HAZARDS only in accordance with UL2601-1
and CAN/CSA C22.2 NO.601.1.”
Identification and Rating Plate
(rear side of the unit)
Type/Class Label
Used to indicate the degree of safety or protection.
IP Code (IPX 0)
IP Code (IPX 1)
IP Code (IPX 7)
degree of protection provided by the enclosure per IEC 60529:
IPX 0 - no protection against ingress of water
IPX 1 - protected against dripping water
IPX 7 - protected against the effects of immersion
various
Equipment Type BF (man in the box symbol) IEC 878-02-03
indicates B Type equipment having even more electrical
isolation than standard Type B equipment because it is
intended for intimate patient contact.
probe connectors
on the base of the unit (Main label)
0123