GE Ultrasonic USM Go, Operator'S Manual

Page: 94 / 190

Chapter 3. Making Measurements
76 USM Go Operator’s Manual
3.3 Displaying Measured Results (cont.)
•
DA - Material-thickness depth from the probe-contacted side of the test-piece surface to the reflector, represented by the Gate A echo.
•
DB - Material-thickness depth from the probe-contacted side of the test-piece surface to the reflector, represented by the Gate B echo.
•
LA - Leg number of the reflector, represented by the Gate A echo.
•
LB - Leg number of the reflector, represented by the Gate B echo.
•
PA - Projection distance from the probe BIP to the reflector, represented by the Gate A echo.
•
PB - Projection distance from the probe BIP to the reflector, represented by the Gate B echo.
•
RA - Projection distance from the probe BIP to the reflector, represented by the Gate A echo, minus the current X-VALUE.
•
RB - Projection distance from the probe BIP to the reflector, represented by the Gate B echo, minus the current X-VALUE.
•
A%rA - Amplitude of the signal crossing Gate A, as a percentage of the active EVAL MODE reference amplitude.
•
A%rB - Amplitude of the signal crossing Gate B, as a percentage of the active EVAL MODE reference amplitude.
•
dBrA - dB equivalent height difference between the signal crossing Gate A and the active EVAL MODE reference height.
•
dBrB - dB equivalent height difference between the signal crossing Gate B and the active EVAL MODE reference height.