GE Ultrasonic USM Go, Operator'S Manual

Page: 90 / 190

Chapter 3. Making Measurements
72 USM Go Operator’s Manual
3.1.3c Select Gate to Be Magnified When Function Toggle Is Pressed (
SETUP-EVAL-MAGNIFY GATE)
The user can indicate the action to be taken when either end of the Function Toggle is pressed. One option magnifies the A-Scan display, so
the assigned gate spans the entire displayed range. To specify the gate that should be magnified on demand:
1. In the
SETUP
menu, activate the
EVAL
submenu using the joystick ( ).
2. Use the joystick ( ) to select the function titled MAGNIFY GATE . Press the center of the joystick ( ) to activate the
function.
3. To select
Gate A
or the
Gate B
, move the joystick up or down ( ).
Note:
Pressing the assigned end of Function Toggle, when
FUNCTION1
or
FUNCTION 2
is set to
MAGNIFY GATE
, magnifies the
display so the selected gate spans the entire displayed range.
4. After making your choice, press the center of the joystick ( ) to deactivate the function.