GE Ultrasonic USM Go, Operator'S Manual

Page: 70 / 190

Chapter 2. Instrument Setup
52 USM Go Operator’s Manual
2.5.1 Setting the A-Scan Range (cont.)
To set the A-Scan range:
1. In the
ACQUIRE
menu, activate the
RANGE
submenu using the joystick ( ).
2. Use the joystick ( ) to select the function titled RANGE , which has both coarse and fine adjustment modes. Coarse adjustments
are made with the function toggle , while fine adjustments are made with the joystick . When “RANGE” appears in all capital letters,
coarse adjustments are being made, while fine adjustments occur when “range” appears in all lower-case letters.
3. Press the function toggle or move the joystick ( ) to change the range setting. Values from 0.040 to 1100 in. are allowed.
Note:
Pressing both buttons on the Function Toggle simultaneously resets the
RANGE
to the default value of
10.000 in.
4. After completing your selection, move the joystick up or down ( ) to navigate away from this function.