GE M
EDICAL
S
YSTEMS
D
IRECTION
FC091194, R
EVISION
02
V
IVID
7 / V
IVID
7 PRO S
ERVICE
M
ANUAL
Chapter 8 - Replacement Procedures
8 - 49
8-4-6-5
Front Casters Installation Procedure
1.) Move the ball piece of the joint from old Caster to new Caster (See
Figure 8-42
).
2.) Align new Caster on the frame and fasten it tightly with four (4x) hexagon screws.
3.) Press the balljoint together and install the lock pin (See
Figure 8-42
).
4.) To replace the other Front Caster, repeat all the steps from
"Front Casters Removal Procedure" on
page 8-46,
but now using the Bevel Edged board and the Wooden Wedge on the other side of the
system.
5.) Install Bumper and Covers as described in
"Front Bumper Installation Procedure" on page 8-50
.
6.) Roll the system off the Bevel Edged Board.
