GE M
EDICAL
S
YSTEMS
D
IRECTION
FC091194, R
EVISION
02
V
IVID
7 / V
IVID
7 PRO S
ERVICE
M
ANUAL
Chapter 3 - Installation
3 - 37
3-9-3
Connectivity Setup
NOTE:
If connected as a stand-alone network (only scanner, EchoPAC PC work station and eventually
a network printer in a separate network), you should use default delivery settings.
3-9-3-1
Introduction
To be able to use the network functions when connected to a hospital network, the scanner must have
a proper network address.
•
Before you can set up the scanner, you need to collect some information. The
"Worksheet for
DICOM Network Information" on page 2-11
can be used for gathering this information. Typically
source for this information is the network administrator.
•
Follow the steps below to prepare the scanner for use on the network.
3-9-3-2
Select TCP/IP Set-up Screen
1.) Press
CONFIG
on the Control Panel and log on as
adm
(see
page 18
).
Figure 3-34 Measuring and Analyzes - Global Level
Connectivity
