GE AF-300 P11, User Manual

Page: 142 / 154

12-7
Data subject to change without notice 7/07. © 2007 GE Drives
Type Generation Series Voltage series
Data 4 Data 3 Data 2 Data 1
(All bit are ON or active by 1)
FWD: Forward operation IL: Current limiting
REV:0: Reverse operation ACC: Under acceleration
EXT: DC braking active (or pre-excitation) DEC: Under deceleration
ALM: Drive fault
INT: No Output RL: Transmission valid
BRK: Braking active WR: Function writing privlege
NUV: DC link voltage is established 0: Keypad panel
(undervoltage at 0) 1: RS485
TL: Torque limiting 2: Fieldbus (option)
VL: Voltage limiting BUSY: Processing data write
Data format [17] Type code
Code Type Generation Series Voltage series
1 - 11 - -
2 G - - -
3 P - - 230V three phase
4 - - - 460V three phase
5 - - USA -
6 - - - -
Data format [18] Code setting (1–4 figures)
Data format [19] Amperage value Decimal data (positive ):
Min. unit 0.01 inverter capacity is not more than 30HP
Min unit 0.01 for not less than 40HP
Example) If F11 (electronics thermal overload relay 1 level)107.0A (40HP)
107.0 X 10=1070=042E
H
If F11 (electronics thermal overload relay 1 level)=3.60A (1HP)
Since 3.60 X 100=360=0168
H
Data format [20] Transmission error code
Code Description Code
1 FC (function code) error 71 CRC error (no response)
2 Illegal address 72 Parity error (no response)
3 Illegal address (Data range error) 73 Other errors (no response)
-Framing error
-Overrun error
-Buffer full error
7 NAK
-Priority for comm
-No privilege for writing error
-Forbidden writing error
Description
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0