GE AF-300 P11, User Manual

Page: 45 / 154

4-8
Data subject to change without notice 7/07. © 2007 GE Drives
4.3.8 I/O Check
Select 4. I/O on the Program Menu screen. Check to display analog and digital input/output signal status for the drive and
options. Use and to switch between the seven screens of data.
60.00 60.00
60.00
RUN
PRG > PRG MENU
F/D > LED SHIFT
FWD
1.DATA SETTING
2.DATA CHECK
3. OPR MNTR
> 4.I/O CHECK
REM X2 X6
FWD X3 X7
REV X4 X8
X1 X5 X9
Signal OFF. Signal ON
Input terminal status (terminals)
60.00
Signal OFF. Signal ON
Signal OFF. Signal ON
Y1 Y5
Y2
Y3
Y4
Output terminal status
60.00
COM X2 X6
FWD X3 X7
REV X4 X8
X1 X5 X9
Input terminal status
(via communication)
60.00
12= ± xx.xV
22= ± xx.xV
32= ± xx.xV
V2= ± xx.xV
Analog input signal
Terminal 12 input
Terminal 22 input voltage
(AIO option)
Terminal 32 input voltage
(AIO option)
Terminal V2 input
60.00
C1=xx.xmA
C2=xx.xmA
Terminal C1 input current
Terminal C2 input current (AIO option)
Analog input signal
60.00
AO=xxxxV
CS=xxxmA
DI=xxxxH
DO=xxH
Analog output voltage (AIO option)
Analog output current (AIO option)
Digital input terminal (HEX indication)
Digital ouput terminal (HEX indication)
DIO option I/O status
60.00
FMA=xx.xH
FMP=xx.xV
FMP=xxxxp/s
Output for meter
FMA output voltage
FMP output voltage
FMP output frequency
PRG
FUNC
DATA
60.00
Master-side A/B phase 4x frequency
Master-side Z phase 4x frequency
Slave-side A/B phase 4x frequency
Slave-side Z phase 4x frequency
PG/SY option input status
P1= ± xxxx0p/s
Z1=xxxp/s
P2=
± xxxxxOp/s
Z2=xxxp/s