GE Medical Systems marquette Dash 2000, Service Manual, Page: 140 / 202

CONFIGURATION: Setup For Use
6-26 DASH 2000 Patient Monitor Revision A
2000 412-001
Bed Number From the service mode menu option items which appear on the monitor
display, follow the next steps of the procedure to setup or configure the
BED NUMBER of the monitor.
About the Monitor Bed
Number
The monitor BED NUMBER is manually programmed into monitor. The
monitor has flash memory which stores the user programmed BED
NUMBER. This acts as a software identification code for the following
applications:
¥ For networked monitors, the BED NUMBER provides unique
network identification for each monitor from groups of devices
sharing the same unit name on the network. The monitor BED
NUMBER software is integrated into electronic packets of
information which are either sent to or received from other devices
on the network.
¥ General identification: The BED NUMBER also is used for
annotation purposes on all graphs generated by the monitor.
WARNING
Do not use the word ÒnoneÓ as a BED NUMBER. This
name can be very confusing to users and make network
troubleshooting extremely difficult.
CAUTION
It is very difficult to visually detect spaces (ÒspacesÓ are
characters) when programmed into the BED NUMBER.
The manufacturer recommends avoiding the use of
spaces in the BED NUMBER.
Setup the Bed Number
of the Monitor Follow these steps to setup or configure the BED NUMBER of the
monitor:
1. Use the Trim Knob control on the front panel of the monitor to select
ADDRESS from the service mode menu option items.
2. Use the Trim Knob control to scroll to SET BED NUMBER in the
address menu and press the Trim Knob control to select it.
MAIN
MENU
BATTERY
SERVICE
REVIEW
ERRORS
CALIBRATE ADDRESS
MONITOR /
ADMIT
TYPE
TIME
AND
DATE
MAIN
MENU
PREV.
MENU
SET
UNIT
NAME
SET
BED
NUMBER
SET
INTERNET
ADDRESS