GE Medical Systems marquette Dash 2000, Service Manual, Page: 138 / 202

CONFIGURATION: Setup For Use
6-24 DASH 2000 Patient Monitor Revision A
2000 412-001
Unit Name From the service mode menu option items which appear on the monitor
display, follow the next steps of the procedure to setup or configure the
UNIT NAME of the monitor.
About the Monitor Unit
Name
The monitor UNIT NAME provides a means of differentiating groups of
devices on the network. Groups of devices with similar care unit names
auto-segment themselves from other groups of devices with different care
unit names on the network. The care UNIT NAME is part of a software
address integrated into electronic packets of information transmitted or
received to or from the network. The UNIT NAME is programmable and
therefore allows users to define groups of devices on the network.
WARNING
Do not use the word ÒnoneÓ as a care UNIT NAME. This
name can be very confusing to users and make network
troubleshooting extremely difficult.
CAUTION
It is very difficult to visually detect spaces (ÒspacesÓ are
characters) when programmed into the UNIT NAME.
The manufacturer recommends avoiding the use of
spaces in the UNIT NAME.
Setup the Unit Name of
the Monitor Setup or configure the UNIT NAME of the monitor by following these
steps:
1. Use the Trim Knob control on the front panel of the monitor to select
ADDRESS from the service mode menu option items.
2. Use the Trim Knob control to scroll to SET UNIT NAME in the
address menu and press the Trim Knob control to select it.
MAIN
MENU
BATTERY
SERVICE
REVIEW
ERRORS
CALIBRATE ADDRESS
MONITOR /
ADMIT
TYPE
TIME
AND
DATE
MAIN
MENU
PREV.
MENU
SET
UNIT
NAME
SET
BED
NUMBER
SET
INTERNET
ADDRESS