GE Medical Systems marquette Dash 2000, Service Manual, Page: 137 / 202

CONFIGURATION: Setup For Use
Revision A DASH 2000 Patient Monitor 6-23
2000 412-001
5. A service menu password window appears on the monitor display.
A password is required to prevent non-service personnel from
accessing the service menus. The password is four numbers that
represent the date that currently resides in a memory circuit within
the monitor (please note that this may or may not be the correct
date). In the password, the first two numbers, starting from the left,
represent the day and the second two numbers represent the month
of whatever date that currently resides in the memory circuits of the
monitor. For example, the seventh day of the third month (March
7th) would be represented in the password as 0703 (
ddmm ). Note the
date that is currently on the monitor display and follow these steps to
enter the password:
a. Rotate the Trim Knob control to highlight the password number
that you would like to change.
b. To change the highlighted number, press the Trim Knob control.
c. Rotate the Trim Knob control until the correct number displays
in the selected field.
d. To enter the number, press the Trim Knob control.
e. Repeat these steps until all password numbers correctly display.
f. Once you have entered the correct password numbers, rotate the
Trim Knob control to highlight SERVICE MODE in the enter
password window.
g. Press the Trim Knob control one more time to enter the password
and access the service menus of the monitor.
21-NOV-1998 16:27
II
DAK.BED 1
CAUTION !!
YOU ARE ABOUT TO ENTER THE
SERVICE MODE OF OPERATION.
IF YOU PROCEED, YOU MAY LOSE
YOUR MONITOR CONFIGURATION.
SOME OPERATIONS WILL CAUSE
A COLD START OF THE MONITOR.
ENTER THE PASSWORD AND
PROCEED AT YOUR OWN RISK!
MAIN
MENU
PREV.
MENU SERVICE
MODE
O O O O