__________________________________________________________Chapter 1- Introduction, Page 1-1
About this Technical Manual
The purpose of this manual is to provide the Operator, Maintenance and Service personnel instructions
for operating, maintaining, troubleshooting and repairing the Gaylord Ventilator Model CG3-UVi-SPC
Series. Ventilators incorporating UV Systems, most maintenance and all repairs must be performed by a
trained and certified service company. This manual also includes information and guidance to
contractors for initial installation of the Ventilator.
The manual is divided into chapters for easy reference to a particular subject. The pages in the chapters
are numbered with the chapter number, then a dash, and then the page number. So for example pages
in Chapter 2 are numbered 2-1, 2-2, 2-3 etc. Figures and Tables are numbered in a similar manor. For
example Figure 5-3-2 is on page 5-3 and is the second figure. Please keep your manual in a convenient
location for so it can be accessed easily.
If you have any questions or concerns with the installation, operation, maintenance or service of your
Gaylord Ventilator, please contact Gaylord Industries;
Web:
Main Phone: 503-691-2010
Toll Free: 800-547-9696
Safety
It is important that the operator read Chapter 2, Principle of Operation, Chapter 3, Daily Operation and
Chapter 3, Maintenance, before operating the Ventilator for the first time. Particular attention should
be given to all the
Caution
and
Warning
statements.
Related Technical Manuals
CG3-UVi-SPC-SPC Series Ventilators are controlled by a Gaylord Command Center. The model number
of the Command Center is dictated by when the Ventilator was purchased. Typical models are C-6000
and C-7000 Series. The model number of your Command Center can be found on the nameplate located
on the back of the electrical compartment door.
All
Installation Operation and Maintenance Manuals
may be downloaded from the Gaylord website:
Gaylord Industries.
