_________________________________Appendix D – Ventilator Start-Up Inspection and Tests, Page D-7
Page 5 of 6
Ventilator Start-Up Inspection and Test Report
For Gaylord Model CG3-UVi-SPC Series Ventilators
UV System Check
To test the UV System start the exhaust fan and check each Ventilator section for the following:
1.
The Green UVi SYSTEM ON light on each Ventilator Section came on. …………….…..… ____ Yes ____ No
2.
The Yellow UVi LAMP FAILURE light on each Ventilator Section is not on. ……………... ____ Yes ____ No
Caution: For tests #3 and #4 eye protection must be worn.
3.
With the fan on open one UV Module Access Door.
4.
With the fan on open a Ventilator Extraction Chamber Inspection Door. The Green UVi SYSTEM ON
light shut off and the Blue UVi SYSTEM STANDBY light came on. ………………………...…. ____ Yes ____ No
5.
With the fan on open a UV Module Access Door. The Green UVi SYSTEM ON light shut off and the
Blue UVi SYSTEM STANDBY light came on. ………………….……………………………………...…. ____ Yes ____ No
SPC System Check
To test the SPC System start the exhaust fan and check each Ventilator section for the following:
1.
Did the ESP CELL STATUS LIGHT come on. ………………………………………………………………. ____ Yes ____ No
2.
Open the ESP Cell Access Door. Did the ESP CELL STATUS LIGHT go off. ………………… ____ Yes ____ No
3.
Push and hold in the Plunger Safety Switch and check the voltage at the 10 KV terminal. It should be
between 9,000 and 11,000 Volts DC. Voltage is: ___________________________________________
4.
Push and hold in the Plunger Safety Switch and check the voltage at the 5 KV terminal. It should be
between 4,700 and 5,500 Volts DC. Voltage is: ____________________________________________
Installation Includes the Following Equipment
____ Gaylord Autostart Control.
____ Gaylord ClearAir Pollution Control Unit. (RSPC)
____ Gaylord Distributor. (UDS)
____ Fire Extinguishing System. Manufacturer ____________________________________________
