Gaspardo MTE-R, Use And Maintenance

Page: 59 / 196

USE AND MAINTENANCE
ENGLISH
-
(1
cod. G19504610
4.6 SEED SELECTION
4.6.1 SEED DISTRIBUTOR
$SODWH)LJFKRVHQDFFRUGLQJWRWKHVL]HRIWKHVHHGLV
LQVWDOOHGLQVLGHWKHGLVWULEXWRUV)LJWKHVHHGVKRXOGQRWEH
DEOHWRHQWHUWKHKROH6KRXOGVXFWLRQFDXVHVRPHVHHGVWRFORJ
WKHKROHVRIWKHSODWHWKHVHZLOOEHOHIWRQWKHJURXQG7KHVHHGHU
LV GHOLYHUHG WR WKH FXVWRPHU ZLWK D VLQJOH VHW RI SODWHV DOUHDG\
LQVWDOOHGRQWKHGLVWULEXWRUV7KH0DQXIDFWXUHUFDQVXSSO\WKHFOLHQW
ZLWKIXUWKHUVHWVRISODWHVVHH
Table 3 SDJH
REPLACEMENT OF SEED DISC AND ADJUSTMENTS
CAUTION
All operations described in this paragraph must be carried
out by expert personnel, equipped with protective gloves, in
a clean and dust-free environment.
- The seeder must be clean and dry and stably positioned.
- If the power take-off is hooked to the tractor it must
be
GLVFRQQHFWHGWKHHQJLQHWXUQHGRႇWKHNH\UHPRYHGDQG
the hand brake pulled.
- Only clean parts in good condition must be installed.
- The plate must be assembled with the pegs (2, Fig. 14) poin-
ting towards the inside of the distributor.
- If some of the pegs are bent or missing from the plate, this
means that foreign bodies have entered the distributor, in
which case the plate must be replaced.
- If there are circular scratches, they must not exceed 1/3 of
the plate thickness.
- Hand-tighten only the winged nut that closes the cover (Fig.
15).
N.B. When replacing worn plates, the cover gasket should
also be replaced.
These are the operations to be carried out:
8QVFUHZDQGUHPRYHWKHZLQJQXW)LJ
2SHQWKHGLVWULEXWRUFRYHU
,QVHUWRUUHSODFHWKHGLVF
,IQHFHVVDU\DGMXVWWKHVHHGVSLOOSUHYHQWLRQSODWHDVGHVFULEHG
IXUWKHURQ
$GMXVWWKHVHOHFWRUDVGHVFULEHGIXUWKHURQ
&ORVHWKHFRYHUDQGVFUHZWKHZLQJQXWEDFNRQ)LJ
$GMXVWWKHVHOHFWRUDVGHVFULEHGIXUWKHURQ
COVER SEAL (plastic)
&KHFNWKHZKROHRIWKHVHHGGLVWULEXWRUFRYHUVHDOVXUIDFHUHJXODUO\
$IRUVLJQVRIZHDU)LJ7KHVHDOPXVWEHUHSODFHGEHIRUH
WKHVXUIDFH©$ªEHLQJZRUQGRZQE\WKHGLVFPRYHPHQWUHDFKHV
VXUIDFH©%ªRU©%ª
%GLVWULEXWLRQRIVPDOOVL]HVHHGVZLWKDQDYHUDJHGLDPHWHUOHVV
WKDQPPHJSHOOHWHGVXJDUEHHWVHHG
%GLVWULEXWLRQRIVHHGVZLWKDQDYHUDJHGLDPHWHUPRUHWKDQ
PPHJFRUQ
Also check that no grooves have been made by the disk along
VXUIDFH©$ª
Replacing the cover seal
ORRVHQWKHQXWV&)LJDQGUHPRYHWKH¿[LQJGLVF'
URWDWHWKHJDVNHW(VRWKDWLWFDQEHHDVLO\UHPRYHG
LQVWDOOWKHQHZJDVNHWEHLQJFDUHIXOWRLQVHUWWKHHGJHLQWRWKH
FRYHUVHDW)URWDWHWKHJDVNHWWRIDFLOLWDWHDVVHPEO\
DOLJQWKHJDVNHWWRWKHFRYHUDWSRLQW*
LQVWDOOWKH¿[LQJGLVFDQGORFNLWZLWKWKHQXWV·1P
A
A
B2
B1
B2
B1
¿J
¿J
1
2
¿J
G
D
C
E
¿J
F
3,5÷4 Nm