Garmin G1000 NXi, Cockpit Reference Manual

Page: 84 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 60
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
7)
Minimums
a) To set ‘Minimums’, turn the small FMS Knob to select ‘BARO’, ‘TEMP COMP’ or ‘RAD
ALT’, and press the ENT Key. Turn the small FMS Knob to select the altitude, and
press the
ENT
Key.
b) If ‘TEMP COMP’ was selected, the cursor moves to the temperature field. Turn the
small
FMS Knob to select the temperature, and press the ENT Key.
or :
To skip setting minimums, press the
ENT
Key. The ‘Load?’ field is highlighted.
8)
Press the
ENT
Key with ‘Load?’ highlighted to load the approach procedure; or turn the
large
FMS
Knob to highlight ‘Activate?’ and press the
ENT
Key to load and activate the
approach procedure.
When selecting a NAVAID exclusive approach, the popup message is displayed: ‘NOT
APPROVED FOR GPS - GPS guidance is for monitoring only. Load approach?’ With ‘Yes’
highlighted, press the
ENT
Key.
Loading an approach procedure into a stored flight plan:
1)
Select a stored flight plan from the ‘FPL - Flight Plan Catalog’ Page.
2)
Press the
Edit
Softkey; or press the
MENU
Key, select ‘Edit Flight Plan’, and press the
ENT
Key. The ‘FPL - Stored Flight Plan’ Page is displayed.
3) Press the Ld aPR Softkey; or press the MENU Key, select “Load Approach”, and press
the ENT Key. The ‘PROC - Approach Loading’ Page is displayed.
4) Select the airport and approach:
a)
Use the
FMS
Knob to select an airport and press the
ENT
Key.
b)
Select an approach from the list and press the
ENT
Key.
or
:
a) If necessary, push the FMS Knob to exit the approach list, and use the large FMS
Knob to move the cursor to the Approach ‘Channel’ Field.
b) Use the FMS Knob to enter the approach channel number, and press the ENT Key to
accept the approach channel number. The airport and approach are selected.
5)
Select a transition for the selected approach. Press the
ENT
Key.
6)
Press the
ENT
Key to load the selected approach procedure.
activating a previously loaded approach:
1)
Press the
PRoC
Key. The ‘Procedures’ Window is displayed with ‘Activate Approach’
highlighted.
2)
Press the
ENT
Key to activate the approach.
activating a previously loaded approach with vectors to final:
1)
Press the
PRoC
Key to display the ‘Procedures’ Window.
2) Highlight ‘Activate Vector-to-Final’ and press the ENT Key.