Garmin G1000 NXi, Cockpit Reference Manual

Page: 27 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 3
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight Instruments
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
4)
If desired, turn the small FMS Knob to set the BARO Transition Alert Altitude On or Off.
5) Turn the large FMS Knob to highlight the Altitude field.
6) Use the
FMS
Knob to change the altitude and press the
ENT
Key to accept or press the
CLR Key to return to the previous altitude selection.
7)
Turn the large FMS Knob to highlight the ‘On’ or ‘Off’ field for the BARO Transition Alert
Level.
8)
If desired, turn the small FMS Knob to set the BARO Transition Alert Flight Level On or
Off.
9)
Turn the large FMS Knob to highlight the Flight Level field.
10) Use the FMS Knob to change the Flight Level for the alert and press the ENT Key to
accept or press the CLR Key to return to the previous altitude selection.
11) Push the
FMS
Knob to deactivate the cursor.
HoRIZoNTaL SITUaTIoN INdICaToR (HSI)
Enabling/disabling the HSI Map on the PFd:
1)
Press the Map/HSI Softkey.
2)
Press the Layout Softkey.
3) Press the HSI Map Softkey to enable the HSI Map.
or :
Press the Map off Softkey to disable the HSI Map.
adjusting the Selected Heading:
Turn the HdG Knob to set the Selected Heading.
Push the HdG Knob to synchronize the bug to the current heading.
adjusting the Selected Course:
Turn the CRS Knob to set the Selected Course.
Push the CRS Knob to re-center the CDI and return the course pointer to the bearing of
the active waypoint or navigation station.
Changing the navigation angle true/magnetic setting:
1)
Use the FMS Knob to select the ‘Aux - System Setup 1’ Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large
FMS
Knob to highlight Nav Angle in the ‘Display Units’ Box.
4)
Turn the small FMS Knob to highlight the desired setting and press the ENT Key.
• True - References angles to true north (T).
• Magnetic - Angles corrected to the computed magnetic variation (Mag Var).