Garmin G1000 NXi, Cockpit Reference Manual

Page: 40 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 16
Nav/Com/XPdR/audio
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
BLUETooTH
NoTE:
Pairing is only necessary during the first attempt to connect a Bluetooth
device to the audio panel. Once paired, the audio panel and the device will connect
automatically.
Pairing a Bluetooth device with the audio Panel
Press and hold the inner knob for two seconds. The Bluetooth Annunciator flashes to in-
dicate the unit is discoverable and the aural message “
Bluetooth discoverable
” is heard. The
audio panel will remain discoverable for 90 seconds or until a successful pair is established.
Once paired, the Bluetooth Annunciator turns steady blue and the aural message “
Bluetooth
paired ” is heard.
assigning an audio Source to the Bluetooth device
Press the TEL , MUS1 , or MUS2 key until the annunciator turns blue (the audio from the
Bluetooth source will not be heard until this step is complete). The key annunciator cycles
OFF-WHITE-BLUE. WHITE selects the wired audio source. BLUE selects the Bluetooth audio
source. The BLUE source assignment will persist through Bluetooth audio connection disrup-
tions.
NoTE: The Bluetooth audio can only be assigned to one source at a time. Once the
Bluetooth audio is assigned to an audio source, the remaining entertainment audio
sources will only cycle between OFF and WHITE.
Bluetooth audio will maintain a separate volume level and Blue Select distribution from the
wired audio source. If the Bluetooth connection is supporting a phone call, all intercom posi-
tions listening to that source can also speak on the call through the headset MICs.
additional Bluetooth Control Functions
When the Audio Panel detects a recording device as the Bluetooth connected device, the
Pilot ICS Annunciator will turn blue. All audio heard by the Pilot will be recorded. Press and
hold the
PILOT ICS Key to enable/disable Bluetooth recording mode.
aUdIo PaNEL PREFLIGHT PRoCEdURE
Manually adjusting the Squelch and Volume Settings:
1)
Press the
MaN SQ
Key so the in-key annunciation is illuminated.
2)
Verify manual squelch is set to full open.
3) To enable the intercom selection(s) press the PILoT ICS , CoPILoT ICS , and/or PaSS ICS
Keys so the in-key annunciation(s) are illuminated.
4) Turn CRSR Control Knob to select the intercom audio source to be adjusted. Once
selected, turn VoL/SQ Control Knob to set the intercom audio level for that position.