Garmin G1000 NXi, Cockpit Reference Manual

Page: 80 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 56
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
Removing a departure from a stored flight plan:
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page.
2) Turn the small FMS Knob clockwise one click to display the ‘FPL - Flight Plan Catalog’
Page.
3) Press the FMS Knob to activate the cursor and turn the FMS Knob to highlight the flight
plan to be edited.
4)
Press the
Edit
Softkey; or press the
MENU
Key, select ‘Edit Flight Plan’ and press the
ENT
Key. The ‘FPL - Stored Flight Plan’ Page is displayed.
5)
Highlight and remove the departure:
a) Turn the large FMS Knob to highlight the white header of the departure.
b) Press the CLR Key. The ‘Remove <procedure name> from flight plan?’ window is
displayed.
or:
a)
Press the
MENU
Key to display the ‘Page Menu’ Window and turn the
FMS
Knob to
highlight ‘Remove Departure’.
b) Press the ENT Key. The ‘Remove <procedure name> from flight plan?’ window is
displayed.
6) With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the CLR Key, or
highlight ‘Cancel’ and press the ENT Key.
7) Press the FMS Knob to remove the flashing cursor.
aRRIVaLS
Loading an arrival into the active flight plan using the PRoC Key:
1)
Press the
PRoC
Key. The ‘Procedures’ Window is displayed.
2)
Highlight ‘Select Arrival’.
3) Press the ENT Key. The ‘PROC - Arrival Loading’ Page is displayed.
4) Use the FMS Knob to select an airport and press the ENT Key.
5)
Select an arrival from the list and press the
ENT
Key.
6) Select a transition (if required) and press the ENT Key.
7) Select a runway (if required) and press the ENT Key. ‘Load?’ is highlighted.
8)
Press the
ENT
Key to load the arrival procedure
Loading an arrival into the active flight plan from the ‘WPT - arrival Information’ Page:
1)
From the ‘WPT - Airport Information’ Page (first page in the WPT group), press the
STaR Softkey. The ‘WPT - Arrival Information’ Page is displayed, defaulting to the airport
displayed on the ‘WPT - Airport Information’ Page.
2)
To select another airport, press the
FMS
Knob to activate the cursor, enter an identifier/
facility name/city, and press the ENT Key.