Garmin G1000 NXi, Cockpit Reference Manual

Page: 184 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 160
annunciations & alerts
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
System Message Comments
VNV UNaVaILaBLE
– Excessive
track angle error.
The current track angle error exceeds the limit, causing the vertical
deviation to go invalid.
VNV UNaVaILaBLE – Parallel
course selected.
A parallel course has been selected, causing the vertical deviation to
go invalid.
VNV UNaVaILaBLE –
Unsupported leg type in flight plan.
The lateral flight plan contains a procedure turn, vector, or other
unsupported leg type prior to the active vertical waypoint. This
prevents vertical guidance to the active vertical waypoint.
WPT aRRIVaL – Arriving at
waypoint -[xxxx]
Arriving at waypoint [xxxx], where [xxxx] is the waypoint name.
WX aLERT
– Possible severe
weather ahead.
The GWX indicates severe weather within ±10 degrees of the
aircraft heading at a range of 80 to 320 nm.
XPdR1 adS-B 1090 – Datalinik:
ADS-B 1090 receiver has failed.
A failure has been detected in the 1090 receiver.
XPdR1 adS-B No TX
–
Transponder: ADS-B out has failed.
ADS-B is inoperative. The transponder may not be receiving a valid
GPS position. Other transponder functions may be available. Service
when possible.
XPdR1 adS-B No PoS
–
Transponder: ADS-B is not
transmitting position.
The transponder is not able to receive position information.
XPdR1 adS-B TRFC –
Transponder: ADS-B traffic has
failed
The Transponder is incapable of processing traffic information.
XPdR1 adS-B UaT – Datalink:
ADS-B in UAT receiver has failed.
A failure has been detected in the UAT receiver.
XPdR1 CoNFIG
– XPDR1 config
error. Config service req’d.
The transponder configuration settings do not match those of
backup configuration memory. The system should be serviced.
XPdR1 CSa FaIL
– Traffic: ADS-B
In traffic alerting has failed.
ADS-B Conflict Situational Awareness (CSA) is unavailable.
XPdR1 FaIL – XPDR1 is
inoperative.
There is no communication with the #1 transponder.
XPdR1 FaULT – Datalink: ADS-B
in has failed.
The transponder is unable to receive ADS-B information.
XPdR1 FIS-B WX
– Datalink:
FIS-B Weather has failed.
The transponder is unable to receive FIS-B weather information.