Garmin G1000 NXi, Cockpit Reference Manual

Page: 83 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 59
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
2)
Highlight ‘Select Approach’, and press the
ENT
Key. The ‘PROC - Approach Loading’ Page
is displayed.
3) Select the airport and approach:
a) Use the FMS Knob to select an airport and press the ENT Key.
b)
Select an approach from the list and press the
ENT
Key.
or
:
a)
If necessary, push the
FMS
Knob to exit the approach list, and use t he large
FMS
Knob to move the cursor to the Approach ‘Channel’ Field.
b) Use the FMS Knob to enter the approach channel number, and press the ENT Key to
accept the approach channel number. The airport and approach are selected.
4) Select a transition (if required) and press the ENT Key.
5) Set minimums:
a)
To set ‘Minimums’, turn the small
FMS
Knob to select ‘BARO’, ‘TEMP COMP’ or ‘RAD
ALT’, and press the
ENT
Key. Turn the small
FMS
Knob to select the altitude, and
press the
ENT
Key.
b)
If ‘TEMP COMP’ was selected, the cursor moves to the temperature field. Turn the
small
FMS
Knob to select the temperature, and press the
ENT
Key.
or :
To skip setting minimums, press the ENT Key.
6)
Press the
ENT
Key with ‘Load?’ highlighted to load the approach procedure; or turn the
large FMS Knob to highlight ‘Activate’ and press the ENT Key to load and activate the
approach procedure.
When selecting a NAVAID exclusive approach, the popup message is displayed: ‘NOT
APPROVED FOR GPS - GPS guidance is for monitoring only. Load approach?’ With ‘Yes’
highlighted, press the
ENT Key.
Loading an approach into the active flight plan from the ‘NRST - Nearest airport’ Page:
1)
Select the ‘NRST - Nearest Airports’ Page.
2)
Press the
FMS
Knob, then turn the large
FMS
Knob to highlight the desired nearest
airport. The airport is previewed on the map.
3)
Press the
aPR
Softkey; or press the
MENU
Key, highlight ‘Select Approach Window’, and
press the
ENT
Key.
4) Turn the FMS Knob to highlight the desired approach.
5) Press the Ld aPR Softkey; or press the MENU Key, highlight ‘Load Approach’, and press
the ENT Key. The ‘PROC - Approach Loading’ Page is displayed with the ‘Transition’ Field
highlighted.
6) Turn the FMS Knob to highlight the desired transition, and press the ENT Key.