Garmin G1000 NXi, Cockpit Reference Manual

Page: 35 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 11
Nav/Com/XPdR/audio
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
aUdIo PaNEL aNd CNS
CoM oPERaTIoN
Manually tuning a CoM frequency:
1)
Turn the CoM Knob to tune the desired frequency (large knob for MHz; small knob for
kHz).
2) Press the Frequency Transfer Key to transfer the frequency to the active field.
3) Adjust the volume level with the COM VoL/SQ Knob
.
4) Press the COM
VoL/SQ
Knob to turn automatic squelch on and off.
auto-tuning a CoM frequency for a nearby airport from the PFd:
1)
Press the
Nearest
Softkey on the PFD to open the ‘Nearest Airports’ Window. A list of 25
nearest airport identifiers and COM frequencies is displayed.
2)
Turn the FMS Knob to scroll through the list and highlight the desired COM frequency.
3)
Press the ENT Key to load the COM frequency into the COM Standby Frequency Field.
4) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency
Field.
auto-tuning a CoM frequency from the WPT and NRST Pages:
1)
From any page the COM frequency can be auto-tuned, activate the cursor by pressing the
FMS Knob or pressing the appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired COM frequency.
3) Press the
ENT
Key to display the ‘Load Frequency’ Window.
4)
Turn the FMS Knob to place the cursor on the desired COM frequency field.
5) Press the ENT Key to load the COM frequency into the selected COM frequency field.
or :
1) Press the
MENU
Key to display the page menu.
2)
Turn the large FMS Knob to scroll through the menu options.
3) Press the ENT Key to place the cursor on the desired selection.
4) Scroll through the frequency selections with the
FMS
Knob.
5)
Press the ENT Key to display the ‘Load Frequency’ Window.
6)
Turn the FMS Knob to place the cursor on the desired COM frequency field.
7) Press the ENT Key to load the COM frequency into the selected COM frequency field.
Changing CoM frequency channel spacing:
1)
From the ‘Aux – System Setup 1’ Page.
2) Press the
FMS
Knob to activate the flashing cursor.