Garmin G1000 NXi Cockpit Reference Guide for the da62
190-02622-00 Rev. A
54
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
2)
The ‘WPT - Departure Information’ Page is displayed, defaulting to the airport displayed
on the ‘WPT - Airport Information’ Page. Press the
FMS
Knob to activate the cursor. To
select another airport, enter an identifier/facility name/city, and press the
ENT
Key.
3)
Turn the large
FMS
Knob to highlight the procedure. The procedure is previewed on the
map.
4)
Turn the small
FMS
Knob to view the available procedures. Press the
ENT
Key to select
the procedure. The cursor moves to the next box (runway or transition). The procedure is
previewed on the map.
5)
Turn the
FMS
Knobs, as required, to highlight a runway or transition. Press the
ENT
Key
to select the runway or transition. The cursor moves to the next box. The procedure is
previewed on the map.
6)
Repeat Step 5, until desired information has been viewed for the chosen procedure.
7)
Press the
Info 1
Softkey or the
Info 2
Softkey to return to the ‘WPT - Airport
Information’ Page.
dEPaRTURES
Loading a departure into the active flight plan using the PRoC Key:
1)
Press the
PRoC
Key. The ‘Procedures’ Window is displayed.
2)
Highlight ‘Select Departure’.
3)
Press the
ENT
Key. The ‘PROC - Departure Loading’ Page is displayed.
4)
Use the
FMS
Knob to select an airport and press the
ENT
Key.
5)
Select a departure from the list and press the
ENT
Key.
6)
Select a runway (if required) and press the
ENT
Key.
7)
Select a transition (if required) and press the
ENT
Key. ‘Load?’ is highlighted.
8)
Press the
ENT
Key to load the departure procedure.
Loading a departure into the active flight plan from the ‘WPT - departure Information’
Page:
1)
From the ‘WPT - Airport Information’ Page (first page in the WPT group), press the
dP
Softkey. The ‘WPT - Departure Information’ Page is displayed, defaulting to the airport
displayed on the ‘WPT - Airport information’ Page.
2)
To select another airport, press the
FMS
Knob to activate the cursor, enter an identifier/
facility name/city, and press the
ENT
Key.
3)
Select a different departure, if desired.
a)
Turn the large
FMS
Knob to highlight the Departure. The departure is previewed on
the map.
b)
Turn the small
FMS
Knob to view the available departures. Press the
ENT
Key
to select the departure. The cursor moves to the ‘Runway’ Box. The departure is
previewed on the map.
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Diamond DA62 System Software Version 2056 10 or later...
Page 2: ......
Page 4: ......
Page 219: ......
