Garmin G1000 NXi, Cockpit Reference Manual

Page: 65 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 41
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
4)
Use the
FMS
Knobs to edit the entry course, and press the
ENT
Key.
5) Use the small FMS Knob to select ‘Inbound’ or ‘Outbound’ course direction, and press
the ENT Key.
6) Use the small FMS Knob to select ‘Time’ or ‘Distance’ length mode, and press the ENT
Key.
7) Use the FMS Knobs to edit the time/length, and press the ENT Key.
8)
Use the small
FMS
Knob to select ‘Right’ or ‘Left’ turn direction, and press the
ENT
Key.
9) Use the FMS Knobs to edit the Expect Further Clearance Time (EFC Time), and press the
ENT
Key.
10) Press the ENT Key while ‘Load?’ is highlighted to insert the hold into the flight plan.
Creating a user-defined hold at the aircraft present position:
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the Active ‘Flight
Plan’ Window (PFD).
2) Press the MENU Key, highlight ‘Hold At Present Position’, and press the ENT Key. The
‘Hold at’ Window appears with the course field highlighted.
3) If desired, use the FMS Knobs to edit the entry course, and press the ENT Key.
4)
Use the small
FMS
Knob to select ‘Inbound’ or ‘Outbound’ course direction, and press
the
ENT
Key.
5)
Use the small
FMS
Knob to select ‘Time’ or ‘Distance’ length mode, and press the
ENT
Key.
6) Use the FMS Knobs to edit the time/length, and press the ENT Key.
7) Use the small FMS Knob to select ‘Right’ or ‘Left’ turn direction, and press the ENT Key.
8)
Use the
FMS
Knobs to edit the Expect Further Clearance Time (EFC Time), and press the
ENT Key.
9)
Press the
ENT
Key while ‘Activate?’ is highlighted to create an Offroute Direct-to hold
waypoint at the aircraft present position and activate the hold.
Creating a user-defined hold at a direct-to waypoint:
1)
Press a
¯
Key and set up the direct-to waypoint as desired, but select ‘Hold?’ instead
of ‘Activate?’ when finished (MFD or PFD).
2)
Use the
FMS
Knobs to edit the entry course, and press the
ENT
Key.
3) Use the small FMS Knob to select ‘Inbound’ or ‘Outbound’ course direction, and press
the ENT Key.
4) Use the small FMS Knob to select ‘Time’ or ‘Distance’ length mode, and press the ENT
Key.
5) Use the FMS Knobs to edit the time/length, and press the ENT Key.
6)
Use the small
FMS
Knob to select ‘Right’ or ‘Left’ turn direction, and press the
ENT
Key.