Garmin G1000 NXi, Cockpit Reference Manual

Page: 183 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 159
annunciations & alerts
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
System Message Comments
PTK FaIL – Parallel track
unavailable: past IAF.
IAF waypoint for parallel offset has been passed.
PTK FaIL – Parallel track
unavailable: bad geometry.
Bad parallel track geometry.
REGISTER CoNNEXT
– Data
services are inoperative, register w/
Connext.
The system is not registered with Connext, or its current registration
data has failed authentication.
SCHEdULER [#] – <message>. Message criteria entered by the user.
SLCT FREQ – Select appropriate
frequency for approach.
The system notifies the pilot to load the approach frequency for
the appropriate NAV receiver. Select the correct frequency for the
approach.
SLCT MaG – Select MAGNETIC
NAV ANGLE display units.
The system notifies the pilot to set the Nav Angle units on the
‘Avionics Settings’ Screen to Magnetic.
SLCT NaV
– Select NAV on CDI
for approach.
The system notifies the pilot to set the CDI to the correct NAV
receiver. Set the CDI to the correct NAV receiver.
SLCT NoN-MaG – Select
alternate NAV ANGLE display units.
The system notifies the pilot to set the Nav Angle units on the
‘Avionics Settings’ Screen to True.
STEEP TURN – Steep turn ahead. A steep turn is 15 seconds ahead. Prepare to turn.
STRMSCP FaIL – Stormscope has
failed.
Stormscope has failed. The system should be serviced.
SVT dISaBLEd
– Out of available
terrain region.
Synthetic Vision is disabled because the aircraft is not within the
boundaries of the installed terrain database.
SVT dISaBLEd – Terrain DB
resolution too low.
Synthetic Vision is disabled because a terrain database of sufficient
resolution is not currently installed.
SW MISMaTCH – GDU software
version mismatch. Xtalk is off.
The MFD and PFD have different software versions installed. The
system should be serviced.
TIMER EXPIRd – Timer has
expired.
The system notifies the pilot that the timer has expired.
TRaFFIC FaIL
– Traffic device has
failed.
The system is no longer receiving data from the traffic system. The
traffic device should be serviced.
UNaBLE V WPT – Can’t reach
current vertical waypoint.
The current vertical waypoint can not be reached within the
maximum flight path angle and vertical speed constraints. The
system automatically transitions to the next vertical waypoint.
VNV UNaVaILaBLE – Excessive
crosstrack error.
The current crosstrack exceeds the limit, causing vertical deviation to
go invalid.