Garmin G1000 NXi, Cockpit Reference Manual

Page: 204 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A
appendix
180
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
21)
For additional information on each database, press and then turn the
FMS
Knob to select
the database, and then press the details Softkey. Press the ENT Key or the
FMS
Knob to
exit.
or:
Press the
Menu
Key and select ‘Details’ using the small
FMS
Knob and press the
ENT
Key.
Press the
ENT
Key or the
FMS
Knob to exit.
22) To view database information for an individual display:
a)
Turn the large FMS Knob and select ‘Aux’.
b)
Turn the small FMS Knob and select ‘System Status’.
c) Press the Display Database Selection Softkey (MFD1 DB, PFD1 DB) to show database
information for each display. Use the small
FMS Knob to scroll through the database
information. Press the ENT Key or the FMS Knob to exit.
Update databases from the ‘aux - databases’ Page:
NoTE: The system will only provide a WIFI connection if new databases have been
detected for download on Garmin Pilot via a valid Bluetooth connection. If there are
no database updates required the system will not provide a WIFI signal.
NoTE: If the mobile device has previously connected to the wireless transceiver, and is
not connected to another WIFI source, the mobile device should connect automatically
to the wireless transceiver. If the mobile device is connected to another WIFI source
(i.e. hangar WIFI), then the wireless transceiver will not connect automatically.
1) Insert the wireless transceiver SD Card in the bottom slot of the MFD if not already
inserted.
2)
Turn the system ON.
3)
Press the ENT Key or the right-most softkey on MFD display to acknowledge the startup
screen.
4) On the mobile device, start Garmin Pilot and tap Home > Connext > database
Concierge.
5)
Turn the large FMS Knob and select ‘Aux’
.
6) Turn the small FMS Knob and select the ‘Connext Setup’.
7) Ensure that WIFI Database Import is enabled in the ‘Device’ Window (Refer to Additional
Features section for instructions to enable WIFI Database Import).
8)
Verify that the mobile device is enabled via Bluetooth in the Bluetooth settings on the
mobile device.
9)
In the ‘Paired Devices’ Window on the ‘Connext Setup’ Page, ensure the system is paired
with the mobile device in use. (Refer to Additional Features for instructions on connection
to a preferred device).