Garmin G1000 NXi Cockpit Reference Guide for the da62
190-02622-00 Rev. A
157
annunciations & alerts
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
System Message
Comments
MFd1 CaRd 2 ERR
– Card 2 is
invalid.
The SD card in the bottom card slot of the specified MFD contains
invalid data.
MFd1 CaRd 2 REM
– Card 2
was removed. Reinsert card.
The SD card was removed from the bottom card slot of the specified
MFD. The SD card needs to be reinserted.
MFd1 CoNFIG
– MFD1 config
error. Config service req’d.
The MFD configuration settings do not match backup configuration
memory. The system should be serviced.
MFd1 CooLING
– MFD1 has
poor cooling. Reducing power
usage.
The MFD is overheating and is reducing power consumption by
dimming the display. If problem persists, the system should be
serviced.
MFd1 dB ERR
– MFD1 multiple
database errors exists.
The MFD detected a failure in more than one database. Reload
databases with new data card. If problem persists, delete databases
and reload with a new card.
MFd1 dB ERR
– MFD1 obstacle
database missing.
The obstacle database is present on another LRU, but is missing on
the specified LRU.
MFd1 dB ERR
– MFD1 terrain
database missing.
The terrain database is present on another LRU, but is missing on
the specified LRU.
MFd1 KEySTK
– MFD1 [key
name] is stuck.
A key is stuck on the MFD bezel. Attempt to free the stuck key
by pressing it several times. The system should be serviced if the
problem persists.
MFd1 MaNIFEST
– MFD1
software mismatch, communication
halted.
The MFD has incorrect software installed. The system should be
serviced.
MFd1 VoLTaGE
– MFD1 has low
voltage. Reducing power usage
The MFD voltage is low. The system should be serviced.
NaV #[1, 2] INoP - CaL
–
Check NAV Calibration.
NAV 1 and/or NAV 2 calibration version error. Check COM
calibration.
NaV #[1, 2] INoP - CoNFIG
–
Check NAV Software And Config.
There is a problem with the NAV 1 and/or NAV 2 software
configuration. Check the configuration. If the problem persists, the
system should be serviced.
NaV #[1, 2] INoP - INTRL
–
NAV Internal Fault.
NAV 1 and/or NAV 2 has an internal fault.
NaV #[1, 2] INoP - SERL
–
Internal NAV Serial Communication
Fault.
NAV 1 and/or NAV 2 serial communication fault. Check NAV serial
communication.
NaV #[1, 2] INoP - SyNTH
–
NAV Synthesiser Lock Fault.
NAV 1 and/or NAV 2 has a synthesizer lock fault.
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Diamond DA62 System Software Version 2056 10 or later...
Page 2: ......
Page 4: ......
Page 219: ......
