Garmin G1000 NXi Cockpit Reference Guide for the da62
190-02622-00 Rev. A
21
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
Reviewing information for a special-use or controlled airspace:
1)
With the desired map page displayed on the MFD, push the
Joystick
to display the Map
Pointer and place the Map Pointer on an open area within the boundaries of an airspace.
(As the Map Pointer crosses the airspace boundary, the boundary is highlighted and
airspace information is shown.)
2)
Press the
ENT
Key to display an options menu.
3)
‘Review Airspaces’ should already be highlighted, if not select it. Press the
ENT
Key to
display the ‘Information’ Window for the selected airspace.
4)
Press the
FMS
Knob, the
CLR
Key, or the
ENT
Key to exit the ‘Information’ Window.
MEaSURING BEaRING aNd dISTaNCE
Measuring bearing and distance between any two points:
1)
Press the
MENU
Key (with the ‘Map - Navigation Map’ Page displayed).
2)
Use the
FMS
Knob to highlight the ‘Measure Bearing/Distance’ Field.
3)
Press the
ENT
Key. A Measure Pointer is displayed on the map at the aircraft’s present
position.
4)
Move the
Joystick
to place the reference pointer at the desired location. The bearing
and distance are displayed at the top of the map. Elevation at the current pointer
position is also displayed. Pressing the
ENT
Key changes the starting point for
measuring.
5)
To exit the Measure Bearing/Distance option, push the
Joystick
; or select ‘Stop
Measuring’ from the ‘Page Menu’ Window and press the
ENT
Key.
ToPoGRaPHy
displaying/removing topographic data on all MFd pages displaying navigation maps:
1)
Press the
Map opt
Softkey.
2)
Press the
TER
Softkey until ‘Topo’ is shown on the softkey to display topographic data.
3)
Press the
TER
Softkey until ‘Off’ is shown on the softkey to remove topographic data from
the navigation map. When topographic data is removed from the page, all navigation
data is presented on a black background.
displaying/removing topographic data on the PFd Inset Map or the HSI Map:
1)
Press the
Map/HSI
Softkey.
2)
Press the
TER
Softkey until ‘Off’ is shown on the softkey to remove topographic data from
the navigation map. When topographic data is removed from the page, all navigation
data is presented on a black background.
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Diamond DA62 System Software Version 2056 10 or later...
Page 2: ......
Page 4: ......
Page 219: ......
