Garmin G1000 NXi Cockpit Reference Guide for the da62
190-02622-00 Rev. A
154
annunciations & alerts
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
System Message
Comments
GFC MaNIFEST
– GFC software
mismatch, communication halted.
Incorrect servo software is installed, or gain settings are incorrect.
GIa #[1, 2] INoP - CRNT
–
Check GIA Current.
GIA 1 and/or GIA 2 current is low. The current should be checked.
GIa #[1, 2] oVER TEMP
– Check
GIA Temperature.
GIA 1 and/or GIA 2 is reporting an over-temperature condition.
GIa #[1, 2] INoP - SERL
–
Internal GIA Serial Communication
Fault.
GIA 1 and/or GIA 2 serial communication fault. Check GIA serial
communication.
GIa #[1, 2] INoP - VoLT
– Check
GIA Voltage.
GIA 1 and/or GIA 2 low voltage. Check voltage.
GIa1 CoNFIG
– GIA1 audio
config error. Config service req’d.
The GIA1 have an error in the audio configuration. The system
should be serviced.
GIa1 CoNFIG
– GIA1 config
error. Config service req’d.
The GIA1 configuration settings do not match backup configuration
memory. The system should be serviced.
GIa1 MaNIFEST
– GIA1 software
mismatch, communication halted.
The GIA1 has incorrect software installed. The system should be
serviced.
GIa2 CoNFIG
– GIA2 audio
config error. Config service req’d.
The GIA2 have an error in the audio configuration. The system
should be serviced.
GIa2 CoNFIG
– GIA2 config
error. Config service req’d.
The GIA2 configuration settings do not match backup configuration
memory. The system should be serviced.
GIa2 MaNIFEST
– GIA2 software
mismatch, communication halted.
The GIA 2 has incorrect software installed. The system should be
serviced.
GMa1 CoNFIG
– GMA1 config
error. Config service req’d.
The audio panel configuration settings do not match backup
configuration memory. The system should be serviced.
GMa1 FaIL
– GMA1 is
inoperative.
The audio panel self-test has detected a failure. The audio panel is
unavailable. The system should be serviced.
GMa1 INSPECTIoN REQUIREd
– Redundant power supply is not
present.
GMA1 backup power source is not connected. The system should
be serviced.
GMa1 MaNIFEST
– GMA1
software mismatch, communication
halted.
The audio panel has incorrect software installed. The system should
be serviced.
GMa1 SERVICE
– GMA1 needs
service. Return unit for repair.
The audio panel self-test has detected a problem in the unit. Certain
audio functions may still be available, and the audio panel may still
be usable. The system should be serviced when possible.
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Diamond DA62 System Software Version 2056 10 or later...
Page 2: ......
Page 4: ......
Page 219: ......
